The ELM3002-0205 EtherCAT measurement terminal from Beckhoff delivers high-voltage measurement functionality for batteries, generators and motors. This feature-filled I/O terminal supports the four measurement ranges of ±60, ±120, ±500 and ±1,000 V, respectively, and is particularly suitable for applications in the fields of electric vehicles (EVs) and renewable energy. In the renewable energy market, the…

The 1520 Signal Simulator and Calibrator offers market-leading WiFi connectivity, ergonomic and visualization features, and up to 10 hours of battery life. Designed to support MTI Instruments’ proven jet engine vibration measurement and balancing systems, the portable signal simulator brings laboratory-grade accuracy directly onto the flightline and to the test-cell. The unit features a rugged,…

The PBS eXpress aircraft engine vibration analysis and balancing system is designed to optimize small-frame turbofan and turboprop engines, commonly utilized in regional jet, business jet and general aviation. The PBS eXpress runs advanced algorithms to record vibration and speed and generate a one-shot balancing solution. The portable system features intuitive setup and operation as…

Opto 22 has expanded its groov RIO edge I/O series with a new energy monitoring unit (EMU) designed to help plant managers, machine operators, and financial analysts understand electrical costs and track changes in load that might give early warning of equipment faults. Using 0.333 V, 1 V, or 5 A current transformers (CTs), groov…

The Moog Test Controller is a 1-to-500-channel system that controls and collects data from any hydraulic or electric test rig. Moog’s engineers designed the controller for tests including airframe components, automotive sub-assemblies, engine components, and full-scale structural checks. “The Test Controller core modules are identical hardware for traditional automotive and aerospace applications, so we simply…

Opto 22 has announced two new I/O modules for its groov EPIC edge programmable industrial controller: GRV-IVAPM-3 for Category III three-phase AC power monitoring up to 600 VAC and GRV-MM1001-10 for universal I/O sensing and control. Cost-effective power monitoring and I/O signal integration are fundamental requirements for large-scale digital transformation. Opto 22’s new module options…

An upgrade of the LOCC-Box module allows completely tool-free installation in the control cabinet. Instead of the cage clamps that are usually used, LÜTZE uses the future-oriented Push-In technology and therefore offers a much greater clamp gauge. Conductor gauges up to 2.5 mm² with and without ferrules are possible and can be connected easily. Ergonomically…

WAGO is expanding our IP67 rated I/O System Field, offering even more flexibility to meet the requirements of decentralized production facilities. There are two options to help provide maximum performance and high-level connectivity: • Fully encapsulated metal housings for harsh environments • Non-encapsulated plastic housings with low mass for mobile applications such as robots The…

SAKOR Technologies, manufacturer of high-performance dynamometer systems, announces that it has developed a series of dynamometer systems suitable for customers required to test and verify the level of efficiency of electric motors in accordance with a variety of national and international standards, including IEC 60034-2-1; IEEE 112B; and Canadian standard C390-93. The SAKOR units can…

Poseidon System’s FerroQ is a standalone device that analyzes a small sample of oil for ferrous debris. The rapid and simple operation accompanied by outstanding sensitivity makes the device a perfect complement to any laboratory oil analysis. The device can be used as a low-cost screening tool to identify samples requiring further analysis, or as a standalone wear debris…

The Model BHP/EPB test bench accurately measures and controls the hydraulic pressure and EPB power levels applied to brake calipers and drums during automotive squeak and rattle, or BSR testing, under a variety of pressure conditions. It does so, in accordance with GMW16316, Objective Brake Component Squeak & Rattle Test procedures. The test bench also…

Advantech, a global leader in IoT technology, launces a next generation OPC UA I/O sensing module with Modbus protocol. ADAM-6300 is an IT/OT convergence series that integrates information technology (IT) systems with operational technology (OT) – representing a leap forward in smart IoT technology for factories and utilities. Moreover, through the OPC UA and built-in…

Acromag’s BusWorks NT series remote I/O modules provide an Ethernet interface for analog, discrete and temperature signals. NTE Ethernet I/O models have dual RJ45 ports and a webserver with Modbus TCP/IP communication to monitor or control the internal I/O channels. An integrated DIN rail bus allows connection of up to three NTX expansion I/O modules.…

WAGO introduces two solid state MOSFET digital output modules that have the ability to switch 2 Amp resistive loads at a frequency up to 1 Hz. With this capability, it can switch high current outputs without concern of wearing out mechanical relay contacts. The 750-527 and 750-528 are both a 4-channel semiconductor I/O modules that…

Abaco Systems, Inc. announced the release of two boards, the SBC314C single-board computer and RAR15XC avionics data bus communications XMC mezzanine board, for embedded flight-certifiable applications. Previously only available as part of the FORCE2C rugged line replaceable unit (LRU), the two are now each available as separate boards. The SBC314C 3U VPX single board computer,…

Two new series of I/O modules have been made available for Control Techniques’ drives, designed to provide drive-based machine control solutions without the need for a PLC or SCADA system. Machine control applications often involve a PLC, using I/O to communicate with sensors attached to the machines involved. For Control Techniques drives, communications protocols are…

Heilind Electronics has expanded its labeling and identification portfolio solutions with the addition of Panduit’s MP100 and MP300 mobile printers. These printers combine printing technology from Epson with industrial labels and application knowledge from Panduit, resulting in exceptional capabilities, print quality, speed and ease of use. The MP100 prints continuous labels from mobile labeling apps…

Parker Hannifin, the global leader in motion and control technologies, as part of its global focus on factory automation, today announced the release of a revolutionary network portal, The PCH Network Portal. The PCH Network Portal provides the opportunity to minimize machine costs, shorten start-up time and offers built in features to help reduce end…

When OEMs can standardize their designs with one family of I/O products, it simplifies their efforts and gives them the flexibility to adapt controller platforms as needed. By Matt Hou, Electrical Engineer, Dinkle International Original equipment manufacturers (OEMs) of machinery and process systems come in all shapes and sizes, serving a variety of industries, but…

WAGO’s 750 series (750-498) 8-channel thermocouple analog input module is compact, easy to wire, configurable, and is 12 mm wide, saving space in control cabinets and reducing installation and commissioning time. The 750-498 can be configured by channel for thermocouple types B, C, E, J, K, N, R, T, and S using WAGO-I/O-CHECK software or…

Ashcroft’s Model K dual sensor thermometer combines two independent temperature sensing devices into a single instrument. For local indication, a silicone-dampened mechanical ANSI/IEC/EN classified bimetal system drives the pointer over an 80-, 100-, 130-, or 150-mm diameter dial. The choice of a stem from 90mm to 2000 mm also contains a type K thermocouple to…

There are times when budget-priced instrumentation, or rented/leased instruments, will handle the job while going easy on the wallet. Amanda Wilson Back in the 1980s, car makers typically used a light vehicle platform for more than eight years before they saw a need to design and develop a new one. This sort of extended product…

The kits, available in three different sets — measurement, sensing, and traceability — are designed to introduce key components so that customers new to Balluff IO-Link can evaluate the suitability of IO-Link for their specific applications and see the Balluff difference. All three kits include Balluff’s IO-Link Master and I/O hub, Balluff inductive and capacitive…

IDEC Corporation announces an update to add EtherNet/IP communications to the MicroSmart FC6A Plus PLC. This update provides more options for end-users, designers, and OEMs to integrate the FC6A Plus with many types of I/O systems and intelligent automation devices. Expanded Connectivity Options The FC6A Plus is already expandable to support up to 2,060 I/O,…

AW-Lake introduces a new series of Clamp-On Ultrasonic Flow Meters that fasten on the outside of vertical or horizontal pipes ranging in size from ½ in. through 48 in. Housed in a water and dust-tight NEMA 4X polycarbonate enclosure, the Clamp-On Ultrasonic Flow Meters are compatible with a range of metal and plastic pipe materials…